Broadband settings allow you to change the connection parameters to your service provider. Usually you will only change these settings if instructed to do so by a technician.
Note: Make sure the DSL light on your modem is solid green before beginning these steps.
1. Connect a device to your network over WiFi or using an Ethernet cable connected to your modem. This works best on a tablet or computer.
2. Open a web browser and type http://192.168.0.1 into the web address field.
3. Sign in to the modem settings (GUI) using your Admin Username and Admin Password, printed on the sticker.
You can find the Admin Username and Password printed on the sticker attached to the side, back or bottom of the modem.
CAUTION!Do not remove your modem sticker. It includes your default Admin Username and Admin Password, which cannot be retrieved if lost. Your modem could become unusable without them.
4. Select Advanced Setup in the main menu.
5. Select Broadband Settings in the left sidebar.
6. Follow the steps to edit the broadband settings.
.png){kind=icon}
